MUGI EVO
MUGI EVO TEA RACER TUTORIALS MULTIMEDIA INFO

Evo Construction - Preparation

Lay out the main wing shape
LAY OUT THE MAIN WING SHAPE
Preparation

Cut out all of the Mugi Evo components as listed on the plans page. You can use the checklist to ensure that you have everything ready to begin building.

Lay the main wing shape of your Evo on a flat surface or building board. You may find that marking construction lines on the wing will help with alignment and accuracy during the build. For example, the centre-line of the aircraft is shown marked above. Make any marks on the inside of your wing to avoid having to clean off surplus ink later.

When you're ready to begin, move on to the next step and fit the nose doubler.

Copyright© 2013 www.mugi.co.uk