|
Evo Construction - Silencer Cut-Out |
|
Trim the Silencer Shape
The silencer 'M' shape at the rear of the Mugi Evo removes an amount of material
near to the pusher prop and a great deal of the noise
associated with models like this is reduced. Another
benefit of the silencer is that the material
removed from the rear of the aircraft,makes it slightly easier
to balance. The 'M' shaped silencer is also the trademark shape
of the Evo.
Trailing edges
At this stage of the build, the trailing edges of your airframe will be somewhat untidy and the top and bottom wing surfaces will not line up . This is normal and occurs as a result of the top surface travelling a greater distance than the bottom in the process of forming the wing section. The trailing edges should be trimmed to a straight line as shown in the diagram above.
|
|
 |